Welcome to the Blind Ambitions Store

Product was successfully added to your shopping cart.

Graber Traditions Wood Blinds

More Views

Graber Traditions Wood Blinds
$135.60

Availability: In stock

Graber Traditions Wood Blinds mean quality at every level, from the top-of-the-line hardware to the patented PureGrain™ Finish process.

The exclusive SureClose headrail provides optimum closure and light control while minimizing wear on the cords. A trapezoidal bottom rail prevents the bottom of the blind from buckling when closed.

Premium wood slats are made from renewable and sustainable North American hardwood for higher quality and lower environmental impact than wood from overseas. This collection features a wide choice of both painted and stained slat colors to coordinate with your home decor.

You can also customize your blind with a variety of style and functional options to get the blind that's just right for you.

Type in the room or location where this window covering will be installed. This information will be included on the label of the box the window covering is shipped in for easy dispersal.
Measurement

Measure the width

Measure the width side-to-side of the exact window frame opening in three places (top, middle, bottom). Please provide the smallest of these three measurements and round down to nearest 1/8 inch.

Please note that for an inside mount blind, Blind Ambitions recommends a standard deduction of 3/8” (0.375”) on the dimension of the window. This standard deduction permits the blind and the brackets to be installed in the window.

Obstructions may cause measurements to vary. Make sure to note them when measuring.

Important: Measure the depth of any protruding sill, ledge or molding that may interfere with the hanging of your blind. Protruding heaters, frames, locks, handles, sills etc. may interfere with your measurements. Please indicate them when measuring your window frame.

Remember: To ensure accurate measurements, use only a high quality, steel tape measure with a wide blade (minimum 1/2”). Tell your Sales Associate about any obstructions inside your window frame (locks, screens, doorknobs, handles, radiators, plants, etc.). Provide all measurements to the nearest 1/8”.

Required minimum depth: Min depth needed: 1 1/2", Full recess depth: 3 1/4”

Measure the height

For inside mount: Measure the HEIGHT (top-to-bottom) of the exact window frame opening in three places (left, center, right). Please provide the LARGEST of these three measurements.

For outside mount: Measure from frame to frame. we recommend to add 2" to the height for wall installation.

 

Obstructions may cause measurements to vary. Make sure to note them when measuring.

Important: Measure the depth of any protruding sill, ledge or molding that may interfere with the hanging of your blind. Protruding heaters, frames, locks, handles, sills etc. may interfere with your measurements. Please indicate them when measuring your window frame.

Remember: To ensure accurate measurements, use only a high quality, steel tape measure with a wide blade (minimum 1/2”). Tell your Sales Associate about any obstructions inside your window frame (locks, screens, doorknobs, handles, radiators, plants, etc.). Provide all measurements to the nearest 1/8”.

Required minimum depth: min depth needed is 1 1/2" and for full recess you need 3 1/4”


Measure to the nearest 1/8" of an inch, if the size is on a 1/16" mark, then round down to the next 1/8"
Two or more blinds can be installed on a single headrail to provide a practical treatment for larger windows or sliding patio doors.
Select the desired width of your slats.
Choose the color you'd like if this is your slat size. Order a free sample for the finishes you're most interested in (up to three free).
Choose the color you'd like if this is your slat size. Order a free sample for the finishes you're most interested in (up to three free).
Choose the color you'd like if this is your slat size. Order a free sample for the finishes you're most interested in (up to three free).
Choose the color you'd like if this is your slat size. Order a free sample for the finishes you're most interested in (up to three free).
Choose how you lift your blind. Standard is the traditional cord. Cordless blinds offer a safer alternative for homes with children and pets. Also elimination of lift cord presents clean and attractive appearance.
Choose how you want to tilt your blinds open and closed.
Choose which side you would like your tilt control located.
Eliminating rout holes reduces visual distraction for a cleaner look,providing maximum privacy and the best available light control. Cloth tapes are decorative and cover the route holes in the slats for additional privacy and light control.
Select the color of your cloth tape.
Choose your valance type. The 3" Classic will complement the appearance of your blinds best and is most typical. Only choose no valance if using a common valance to cover this blind's headrail and others next to it.
If valance returns are selected, the valance will be wider than the blind to accommodate the returns.
Enter the size of the common valance you need to the nearest 1/8" of an inch. If you don't need a common valance skip this option.
+$32.39

Maximum number of characters: 50

Enter the size of the cutout you need to the nearest 1/8" of an inch and the location. If you don't need a cutout skip this option.
+$39.60

Maximum number of characters: 100

Select yes if you are mounting this on a door or something else that is open and closed a lot and you want your blind to stay in one place.
Spacer blocks or shims are thin pieces of material used to increase the depth or clearance.
Select any decorative add ons you would like.
Select yes if you would like this blind installed. Minimum charge for install is $100.
Add any additional notes you think are important for this blind.

Maximum number of characters: 500

* Required Fields

Description

Details

HEADRAIL

  • SureClose™ Headrail is 1⅝" high x 2¼" wide x .022" thick U-shaped, extruded steel with ⅛" light-blocking lip on the bottom center line.
  • The steel finishing process includes phosphate treatment for corrosion resistance, a chrome-free sealer, a low hazardous air pollutants (HAP) urethane primer, and a topcoat of low HAP polyester-baked enamel.
  • Cordless lift option uses 2" x 2¼" steel headrail.
  • Headrail offers oversize blind capability.
  • Valance is grained, smooth-sanded 100% North American Basswood.

BOTTOMRAIL

  • Bottomrail is ⅝" high x 2 in a trapezoid shape to improve closure.
  • Bottomrail coordinates with slats.

CONTROLS

  • Cord tilt and cord lift are standard.
  • Tilt rod is electro-zinc coated solid steel measuring ¼" square.
  • Cordlock is a snap-in design made of metal and incorporates a floating, shaft-type locking pin.
  • The cordlock design provides a crash-proof safety feature that locks the blind automatically upon release of the lift cord.
  • Cradles are made of low-friction polypropylene with metal lift cord rollers.
  • Drums are made of high-strength thermoplastic, which securely anchors braided ladder or fabric tapes.

SLATS

  • Slats are made from North American hardwood harvested though sustainable-yield forest management techniques and are resistant to warping.
  • Standard size is 2". Optional sizes of 1", 2 3/8" and 2 1/2" available for an extra charge
  • Braided ladder is made of 100% polyester yarn, incorporating two extra-strength rungs per ladder for slat support. Standard ladder spacing is 44mm.

OPTIONS

  • NoHoles™ privacy slats
  • 1" and 1 1/2" cloth tapes
  • Valances: 3" Classic, 3 1/2" Legacy, 4 1/2" Symphony
  • Wand tilt
  • Cordless lift
  • Cut-outs

DIMENSIONS

Maximum panel width: 96"

CORDED

Minimum width: 7"

Maximum width: 120" multiple blinds on one headrail, 96" single blind

Minimum height: 10", 6" for 1" slats

Maximum height: 120"

CORDLESS

Minimum width: 12"

Maximum width: 120" multiple blinds on one headrail, 84" single blind

Minimum height: 10"

Maximum height: 86", 60" for 2½" shutter-style slats

BRACKETS

  • Installation brackets are a universal style and allow for a top, back, or side mount.
  • Brackets are made from phosphate-treated steel with urethane primer and polyester-baked enamel finish to match headrail.
  • Bracket design incorporates a hinged front cover.
  • Extension brackets option
  • Hold down brackets option

WARRANTY

Headrail: Limited Lifetime Warranty​

Reviews
Measure and Installation
Measure and Install

The Perfect Blind™ package includes a professional measure guarantee of every window in your house and the installation of your first ten window coverings!

Each window covering we install after the first ten is only $15!

To get started, click ADD TO CART and begin the check out process.**

$149.00
For more information Click Here.

**Once you add The Perfect Blind package to your cart you won't be able to add any additional product. Once we perform the measure you can add product to your cart.

Measure and Install
Measure and Installation Service Page Already added.

Good news!

The Measure and Installation service will measure all your products first, including the product you are trying to add. You will need to either delete the Measure and Install service from your cart or check out with your current selection and a customer care specialist will call shortly to schedule an appointment. Please click here for more information.

Good news!

Either remove Measure and Install or check out and our customer care specialist will call shortly to schedule an appointment.